:	Jul 1, 2004

.

Fully extend the steering column for access.

.

Remove the instrument panel access panel.   Release the 2 clips.

.

Remove the steering column upper shroud.   Release the 6 clips.

.

Remove the steering column lower shroud.   Remove the 3 Torx screws.   Release the steering column adjustment lever.

.

Remove the steering column side trim panel.   Release the clips.   Repeat the above procedure for the other side.

.

Release the steering column gaiter panel.   Remove the 2 Torx screws.   Release the 2 clips.

.

Remove the in-vehicle temperature sensor.   Release the 2 clips.   Disconnect the electrical connector.   Disconnect the hose.

.

Install the in-vehicle temperature sensor.   Connect the hose.   Connect the electrical connector.   Secure the clips.

.

Install the steering column gaiter panel.   Secure with the clips.   Tighten the Torx screws.

.

Install the steering column side trim panels.   Secure with the clips.

.

Install the steering column shrouds.

.

Install the instrument panel access panel.